Table of Contents
Advertisement
Using the Setup Mode Instructions
To best utilize the following setup instructions, first
read the sections Entering Setup Mode , Navigating
Within Setup Mode , and Saving Changes – Exiting
Setup Mode, page 34. These sections will give you
the basic information needed to use the Setup Mode.
The Setup Level Function information on the following
pages provides you with detailed information about
accessing and using all the available proportioner
functions. Where applicable, the following information
is provided:
Default setting
How to access the function
What the keypad displays for that function
What the system schematic displays for that
function
How to change values within that function
The keypad keys that are used in a procedure are
indicated by numbers on the keys. See Fig. 35. The
keypad display will show the default setting where
applicable.
Setup Mode
1
Fig. 35
The system status is indicated by the lights on the
keypad and system schematic. See the Key below for
the meaning of the various ways the lights can appear
and the symbols used in this manual for the light
status.
KEY
Light off: function is inactive
Light green: function is active
Light blinking: indicates what information is display-
ing on the keypad
Once you are familiar with the setup functions and how
to use them, you can use the Keypad Quick Refer-
ence table in the Operation Manual 308875 for a quick
reference to the setup functions.
2
3
4
5
6
7
Advertisement
Table of Contents
