Table of Contents
Advertisement
Pressure Key 3, Level 6
Low Pressure Sensor Option
Default Setting: 2, no low pressure sensors
Purpose
To set the control to monitor for low pressure at the
reservoir outlet if the low pressure sensor accessory
has been installed.
Access
In setup level 6, press key 3 on the keypad to access
the Low Pressure Sensor option.
Keypad Display
The key 3 light is green and 6 appears in the keypad
setup level position. See Fig. 59.
System Schematic Panel
The low pressure A or B lights will blink if option 1, low
pressure sensors installed, is selected.
Changing Values
Press an arrow key until the number for the desired
Low Pressure Monitoring setting displays.
1
Low pressure sensors installed.
2
No low pressure sensors installed.
Pressure Key 3, Level 7
Key is currently inactive.
Setup Functions
Fig. 59
Fig. 60
3
Low Pressure A or B
A
B
A B
A/B S
A
A/B
S
B
B AB
A
A
B
Advertisement
Table of Contents
