Removing The Mix Manifold - Graco SuperCat 232096 Instruction Manual

Removing the Mix Manifold for Service
1. Flush the mix manifold, using the solvent pump, as
frequently during the day as necessary to avoid
exceeding the work-life limit of the material being
pumped.
2. Clean the static mixer weekly. Refer to page 77.
3. Follow the Pressure Relief Procedure on page 20.
4. Refer to the CAUTION on page 79. Label the
component A and B hoses and remove them from
the manifold inlet fittings.
5. Loosen the knob (K) and lift the mix manifold panel
off the hanger bracket (N), using the handles (P).
6. Refer to the mix manifold manual 308858, sup-
plied, for service.
N
Fig. 103
Service
P
Fig. 104
K
8344A–part
Gauge Port
Service
Port
Gauge Port
Service
Port