Table of Contents
Advertisement
Maximum working fluid pressure . . . . . . . . . . . . 5000 psi (35 MPa, 345 bar)
Maximum solvent supply pressure . . . . . . . . . . 4600 psi (32 MPa, 317 bar)
Maximum air input pressure . . . . . . . . . . . . . . . 100 psi (0.7 MPa, 7 bar)
Air supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80–100 psi (0.5–0.7 MPa, 5.5–7 bar).
Air consumption (with President feed pumps)
Mixing ratio range . . . . . . . . . . . . . . . . . . . . . . . .2:1, 3:1, or 4:1 Fixed Ratio, depending on model
Fluids handled . . . . . . . . . . . . . . . . . . . . . . . . . . . T wo-component epoxy paints, solvent borne epoxies, waterborne
Fluid filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 mesh minimum
Fluid flow at 20 cycles per minute . . . . . . . . . . . 2:1 ratio (232096): 2.3 gpm (8.7 liters/min)
Operating temperature range . . . . . . . . . . . . . . 62 to 120 F (16 to 49 C)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . approximately 1350 lb (612 kg)
Wetted parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P remier proportioning pump: 304, 440, and 17–4 PH stainless
Sound data
N ormal operating conditions, Premier at 25
cpm/70 psi (480 kPA, 4.8 bar)
Sound pressure level . . . . . . . . . . . . . . . . . .
Sound power level . . . . . . . . . . . . . . . . . . . .
Maximum operating conditions, Premier at 60
cpm/90 psi (620 kPa, 6.2 bar)
Sound pressure level . . . . . . . . . . . . . . . . . .
Sound power level . . . . . . . . . . . . . . . . . . . .
NOTE: See the individual component manuals listed on page 79 for additional technical data.
* Dependent on application. For more detailed information on viscosities, flow rates, or mixing ratios, consult your Graco repr e -
sentative.
Sound levels include both agitators. Tested per ISO 3744–1981
PTFE
and Delrin
Technical Data
150 scfm (4.2 m /min)
epoxies, primers, tank linings, fire retardants, anti-foulants
3:1 ratio (232097): 1.75 gpm (6.6 liters/min)
4:1 ratio (232098): 2.2 gpm (8.3 liters/min)
steel, Tungsten carbide,
President solvent pump: 303, 316, 440C, and 17–4 PH stainless
steel, tungsten carbide,
Reservoirs: 304 & 316 Stainless steel
Fluid filters: 303, 304, 313, and 316 stainless steel,
polyethylene
Mix manifold: 17–4 PH, 304 & 316 Stainless steel, tungsten
PTFE
carbide,
Static mixer: 304 & 316 Stainless steel
Proportioner supply hose:
Fluid supply hose: Nylon, 304 (or 316) Stainless steel couplings
Airless spray gun: Stainless steel, polyethylene, polyurethane,
PTFE
nylon,
83.1 dBa
93.1 dBa
88.6 dBa
98.8 dBa
PTFE
, leather
PTFE
, Delrin , PEEK
PTFE
, 316 Stainless steel couplings
PTFE
,
Advertisement
Table of Contents
