Table of Contents
Advertisement
WARNING
INJECTION HAZARD
To reduce the risk of a serious injury,
follow the Pressure Relief Procedure
on page 20 before checking or servicing
the equipment.
WARNING
MOVING PARTS HAZARD
To reduce the risk of injuring or amputat-
ing hands, fingers, or other body parts,
never place your hands, body or tools
inside the safety panels while the unit is
operating.
WARNING
ELECTRIC SHOCK HAZARD
To reduce the risk of electric shock, the
air to the air driven power supply must
be shut off before servicing the control.
CAUTION
Be sure to label all fluid path parts "component A" or
"component B". Doing so prevents interchanging A
and B parts, which will contaminate the materials and
the fluid path through the equipment.
Color-coded chemically resistant tape may be used
to label the parts. Use Part No. 070540 blue for
component A, 070541 green for component B,
070542 red for mixed material, and 070543 white for
solvent.
Service
Wear the grounding strap provided when servicing
the control to avoid shorting out the circuit board.
Instruction Manuals
Additional instruction manuals are included with the
SuperCat proportioning package. See page 4 for the
list of instruction manuals. To maintain, service, or
order parts for an individual component, such as the
proportioning pump, refer to its instruction manual.
Hardware or Software Updates
Check with your Graco distributor periodically to see if
hardware or software updates are available.
PTFE
Use of
Apply
PTFE
assembling them. Leave the first (starting) thread
uncovered to maintain electrical continuity.
Required Tools
Set of large adjustable wrenches
Set of metric sockets or wrenches
Large pipe wrench
Torque wrench
Rubber mallet
Flat end punch
CAUTION
Tape
tape and sealant to pipe threads before
Advertisement
Table of Contents
