Setup Mode - Graco Therm-O-Flow 20 EasyKey NXT 2200 Instructions-Parts List Manual

Setup Mode

Entering Setup
Press to enter or exit Setup. You must be in system
off state to enter Setup.
Password Screen
If a password was enabled you must enter the password
before entering Setup mode. See Table 7, page 23.
Entering the wrong password returns you to the Run
screens.
If a password is enabled, "Setup Locked" displays
momentarily after exiting Setup mode and returning
to the Run screens.
Setup Screen Menu
The Setup screens contain tabs across the bottom of
the screen for the Zone, Timer, Report, and Advanced
screens. The current screen is highlighted. See F
and F . 12.
IG
F . 11: Setup Screen 1
IG
311976A
Zone Setup Screens
Zone Setup has 2 screens. The screen number appears
on the right side of the screen. See F
See Table 5 on page 20 for settings.
Press the Enter
and to enter your selection.
F . 12: Setup Screen 2
IG
. 11
IG
EasyKey Display Screens
. 11 and F
IG IG
key to show drop-down lists
. 12.
19