Table of Contents
Advertisement
Solvent Key 2, Level 5
Save Recipes
Default Setting: 1, 2, 3, or 4 (1:1, 2:1, 3:1, or 4:1 ratio
with temperature sensors off), or 5, 6, 7, or 8 (1:1, 2:1,
3:1, or 4:1 ratio with temperature sensors on, feed
pumps on, and high level sensors selected)
Purpose
To save the current setup selections as a new recipe
under a selected number.
A recipe is a group of settings that you save for use
with particular materials. A recipe can then be selected
whenever the related material is used.
Recipes 1, 2, 3, and 4 contain the default settings for
1:1, 2:1, 3:1, and 4:1 ratios respectively, with tempera-
ture sensors off. Recipes 1, 2, 3, and 4 cannot be
changed or deleted.
Recipes 5, 6, 7, and 8 contain the default settings for
1:1, 2:1, 3:1, and 4:1 ratios respectively, with tempera-
ture sensors on, feed pumps on, and high level sen-
sors selected. Recipes 5, 6, 7, and 8 cannot be
changed or deleted.
Copy the form on page 57 and use it to record your
recipe settings. Keep your records where they are
accessible to the person doing setup and where they
will not be damaged.
Access
In setup level 5, press key 2 on the keypad to access
the Save Recipe function.
Keypad Display
The key 2 light is green and 5 appears in the keypad
setup level position. See Fig. 45.
System Schematic Panel
There is no related panel display.
Setup Functions
Changing Values
Press an arrow key until the number you want to
assign the recipe displays. Only unused recipe num-
bers will be displayed. Exit setup mode from this
function to save the recipe under the selected number
and to run the new recipe.
NOTE: Recipes 1 through 8 cannot be changed or
deleted.
Fig. 45
Solvent Key 2, Level 6
Key is currently inactive.
Solvent Key 2, Level 7
Current Software Revision
Purpose
To display the current software revision of the con-
trol.
Fig. 46
2
2
Advertisement
Table of Contents
