Table of Contents
Advertisement
Mirus for H2 Classic GrainGage
2. 3.7 Conf igure Overflow Sensor
Go to Setup > H2 GrainGage > Sensors.
1. Tap Level Detect.
Mirus opens the Level Detect Sensors Setup screen on which you can configure Level Clear Delay and
enable/disable the Overflow Sensor.
Note: Currently, only H2 Classics mounted on Wintersteiger Quantum or Classic Plus combines are
equipped with an overflow sensor that trips when grain is in close proximity. The overflow sensor should be
enabled if you are using either of these combines.
Level Detect Sensors Settings
Setup Parameter
Level Clear Delay
Overflow Sensor
Mirus and H2 Classic GrainGage Setup
Default Value
Description
The amount of time delay between last level/weight trip and
1000 msec
the start of the flush cycle .
Yes
Enables the sensor for use in overflow detection .
25
Advertisement
Table of Contents
