Table of Contents
Advertisement
H2 Stationary GrainGage User's Guide
3.1. 2 Enter/Exit Glean Mode
Glean Mode is not used with the H2 Stationary GrainGage.
3.1. 3 Weight Diagnostics
Weight Diagnostics
Item
Weight
Load Cell 1
millivolts / Load
Cell 2 millivolts
H2 Stationary GrainGage Diagnostics and Alerts
Description
Shows the weight of the contents in the weigh bucket . Depending on the
preferred units of measure, weight will be shown in pounds or kilograms .
To change the units of measure see 2.2.2 Set Preferred Units of Measure on
page 21 .
These readings are for the two load cells that measure plot weight . The
millivolt readings vary linearly with weight added . The empty weigh bucket
causes the load cells to read between 3 and 4 mV .
On the Weight Diagnostics screen, live values are shown
for the load cells.
Unlock the
screen to view
additional
information.
39
Advertisement
Table of Contents
