Collect Harvest Data; Harvest With Cycle Button - Juniper HarvestMaster mirus H2 User Manual

Mirus for H2 Classic GrainGage

6 .4 Collect Harvest Data

6 .4.1 Har vest with Cycle Button
1. Open the Mirus Harvest screen.
2. Select a map, configure the harvest setup, choose traits, and a moisture curve. See 6.2 Open Harvest
Mode on page 99 for specifics.
3. Start the thresher and throttle up.
4. Tare the GrainGage if necessary.
5. Tap the Start button in Mirus.
Start
6. Harvest the first plot.
7. Press Remote Enter or Cycle
8. When prompted with a green Go button
9. Repeat for each plot.
Harvest Mode
when all the grain is in the GrainGage.
, start into the next plot.
116