Table of Contents
Advertisement
7
Proper setting
When the stitch length is set to 0, the lateral position of the feed dog is in
the center relative to the throat plate. The needle pierces in the center of
the feed dog, both sideways and in the sewing direction.
Information
Details on the settings of the Feed dog feed movement, the feed dog lift
and the compensating weight are provided in the chapter Basic settings
of the eccentrics ( p. 36).
44
Adjusting feed dog and needle bar linkage
WARNING
Risk of injury from moving parts!
Crushing possible.
Move the machine into the service routine before
adjusting the feed dog.
WARNING
Risk of injury from moving parts!
Crushing possible.
Move the machine into the service routine before
aligning the needle bar linkage.
Adjusting feed dog and needle bar linkage
Service Instructions D867 e-con - 00.0 - 08/2023
Advertisement
Table of Contents
