Adjusting Feed Dog And Needle Bar Linkage; Adjusting The Feed Dog Position - Dürkopp Adler D869 e-con Service Instructions Manual

Adjusting feed dog and needle bar linkage

7
Proper setting
When the stitch length is set to 0, the lateral position of the feed dog is in
the center relative to the throat plate. The needle pierces in the center of
the feed dog, both sideways and in the sewing direction.
Information
Details on the settings of the feed dog feed movement, the feed dog lift
and the compensating weight are provided in the chapter Basic settings
of the eccentrics ( p. 38).
7.1
Proper setting
When the stitch length is set to 0, the needle pierces exactly in the center
of the needle hole and the feed dog is exactly in the center of the throat
plate cutout, both sideways and in the sewing direction.
Information
For minimal deviations, it suffices to move the feed dog on the carrier
( p. 48).
Service Instructions D869 e-con - 00.0 - 09/2023
Adjusting feed dog and needle bar linkage
WARNING
Risk of injury from moving parts!
Crushing possible.
Move the machine into the service routine before
adjusting the feed dog.
WARNING
Risk of injury from moving parts!
Crushing possible.
Move the machine into the service routine before
aligning the needle bar linkage.

Adjusting the feed dog position

47