Programming
19 Programming
19.1 Logging in as a technician
The factory setting of the software is such that the Default User will be
logged in automatically when the machine is switched on. This does not
require any type of authorization. The auto login can be switched off at the
Technician level, and the Default User and the Default Technician
can be deactivated if a new user was created previously ( p. 169).
The following explains how you can switch users.
To log in as a technician:
1. Press the symbol
This opens the navigation interface.
Fig. 101: Logging in as a technician (1)
(1) - Logout
2. Press Logout (1).
This opens the login interface.
Fig. 102: Logging in as a technician (2)
Service Instructions D867 e-con - 00.0 - 08/2023
to bring up the navigation pane.
①
117