Setting The Needle Thread Clamp Parameters - Dürkopp Adler D867 e-con Service Instructions Manual

Programming

19.4.2 Setting the Needle thread clamp parameters

Various settings can be made for the thread clamp. The possibilities are
explained in more detail in the table.
Icon
Service Instructions D867 e-con - 00.0 - 08/2023
Menu items
Needle thread clamp
Mode
Various modes (1 to 10) are available;
explanations can be found in the
 Parameter list
Material thickness
compensation
Thread clamp angle
Position for lifting/lowering the sewing
feet to release a thread jammed
underneath.
Sewing foot angle
Option
Mode of thread clamp
0 = at seam beginning only
1 = seam beginning + during turn back
2 = seam beginning + during sewing
foot lift
3 = seam beginning + during turn
back + sewing foot lift
Value range
• Value range
On/Off
• Value range
1 - 10
• Value range
On/Off
On
• Value range
000 - 359 [°]
Off
• Value range
000 - 359 [°]
On
• Value range
000-359
Off
• Value range
000-359
Height
• Value range
01.0 – 12.0 [mm]
PrePressure
• Value range
01-20
PreStroke
• Value range
0.0-9.0 [mm]
• Value range
0, 1, 2, 3
131