Table of Contents
Advertisement
Bobbin winder
12.3 Adjusting the bobbin thread guide
Fig. 63: Adjusting the bobbin thread guide
(1) - Screw
The position of the bobbin thread guide determines how the bobbin thread
is wound onto the bobbin.
Proper setting
The bobbin thread is wound on evenly over the entire width of the bobbin.
To adjust the bobbin thread guide:
1. Loosen the screw (1).
2. Turn the bobbin thread guide (2):
3. Tighten the screw (1).
Service Instructions D867 e-con - 00.0 - 08/2023
①
②
• To wind on the bobbin thread further to the front:
Turn the bobbin thread guide (2) to the front
• To wind on the bobbin thread further to the rear:
Turn the bobbin thread guide (2) to the rear
(2) - Bobbin thread guide
77
Advertisement
Table of Contents
