Check For Console Power; Cable Tv Hook Up - Life Fitness LF-ARC-LB-B1 Assembly Instructions Manual

Check for Console Power

Check the battery by pressing the Go / Green Arrow button. The console should beep and light up. If a prompt
doesn't appear, mount the unit and begin pedaling. The console should light up and programming a workout should
be possible. Pedal for 10 - 20 minutes at 50 rpm or faster during a workout for optimum battery charging. The pedal
action during workouts keeps the battery charged. Optional external power supply can be used. If the unit is externally
powered, battery maintenance is automatic and pedaling is not required. Use only the power supply provided by Life
Fitness to insure against unsafe operation.

Cable TV Hook Up

The console can receive both analog and digital signals. LIFE FITNESS is not responsible for the installation of CATV
service or components required for the delivery of CATV service. An external TV signal input via a 75-ohm coaxial
cable must be present before TV setup can occur.
Note to the CATV Installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building as close to the point of cable entry as practical.
Page 9 of 45