Installing The Pump - Agilent Technologies 1260 Infinity VL User Manual

3

Installing the Pump

Installing the Pump

Installing the Pump
Parts required #
1
1
1
1
For other cables see text below and
Preparations • Locate bench space.
• Provide power connections.
• Unpack the module.
Module is partially energized when switched off, as long as the power cord is
WA R N I N G
plugged in.
Repair work at the module can lead to personal injuries, e.g. shock hazard, when the
cover is opened and the module is connected to power.
➔
➔
➔
"Defective on arrival" problems
C A U T I O N
If there are signs of damage, please do not attempt to install the module. Inspection by
Agilent is required to evaluate if the instrument is in good condition or damaged.
➔
➔
34
p/n Description
Pump
Data System
and/or
G4208A Instant Pilot
Power cord
Make sure that it is always possible to access the power plug.
Remove the power cable from the instrument before opening the cover.
Do not connect the power cable to the Instrument while the covers are removed.
Notify your Agilent sales and service office about the damage.
An Agilent service representative will inspect the instrument at your site and
initiate appropriate actions.
"Cable Overview" on page 156.
1260 Infinity QuatPump VL User Manual