Reinstalling The Pump Head Assembly - Agilent Technologies 1260 Infinity VL User Manual

9
Maintenance

Reinstalling the Pump Head Assembly

Reinstalling the Pump Head Assembly

When When reassembling the pump
Tools required p/n
8710-2392
Parts required p/n
79846-65501
1
If needed, apply a small amount of grease on the back of
the screws. Normally, the grease added during
manufacturing is sufficient for a long time.
128
Description
Hex key 4 mm15 cm long T-handle
Description
Pump head grease
2
Slide the pump head assembly onto the pump drive and
use a 4 mm hexagonal key to tighten the pump head
screws stepwise with increasing torque (max. 5 Nm).
1260 Infinity QuatPump VL User Manual