Agilent Technologies 1260 Infinity VL User Manual page 126

9
Maintenance
Maintenance of a Pump Head with Seal Wash Option
5
Using the steel side of the insert tool remove the seal wash
gasket and the wash seal from the support ring. The
removed seal will be damaged and cannot be re-used!
Seal wash support ring
Wash seal
7
Place a seal wash gasket in the recess of the support ring.
Put the seal holder on top of the gasket.
126
6
Using the plastic side of the insert tool press the new wash
seal (spring pointing upwards) into the recess of the
support ring.
8
Place the support rings on the piston housing (pistons not
installed) and snap the pump head and piston housing
together. Note the correct position of the pin on the
support ring.
1260 Infinity QuatPump VL User Manual