Agilent Technologies 1260 Infinity VL User Manual page 123

5
Using the plastic side of the insert tool, insert new seals
into the pump head.
Piston seals
7
Insert the pistons and carefully press them into the seals.
Pistons
Next Steps:
9
If a standard seal has been installed, run the seal wear-in procedure, see
includes a replacement of the purge valve frit.
10
For the normal phase seal, the purge valve frit should be replaced, see
1260 Infinity QuatPump VL User Manual
Maintenance of a Pump Head Without Seal Wash Option
6
Reassemble the pump head assembly. Note the correct
position of the pin on the support ring.
8
Tighten the lock screw.
Lock screw
"Seal Wear-in Procedure"
"Exchanging the Purge Valve Frit"
9
Maintenance
on page 130, which
on page 117.
123