Install Front Brackets; Install Locking Bracket On Wheel Lock - Invacare Solara 3G Service Manual

Install Front Brackets

NOTE: For this procedure, refer to FIGURE 16.7.
1. Secure the front bracket to the seat rail vertical tube with two mounting screws, washers, and locknuts. Tighten securely
2. Repeat STEP 1 for opposite side of wheelchair.
12-16 inch Deep Seat Frames
Locknuts
Washers
Front Bracket

Install Locking Bracket on Wheel Lock

NOTE: For this procedure, refer to FIGURE 16.8.
1. Remove the mounting screw and washers that secure the wheel lock bracket in place.
2. Slide locking bracket on to wheel lock.
3. Secure locking bracket in place with existing mounting screw and washers. Tighten securely.
4. Repeat STEPS 1‐3 for remaining wheel lock.
Part No 1160889
Mounting
Screws
FIGURE 16.7 Install Front Brackets
Locking Bracket
Mounting Screw
FIGURE 16.8 Install Locking Bracket on Wheel Lock
SECTION 16—TRANSPORT READY
15-19 inch Deep and 18 - 22 inch Deep Seat Frames
Locknuts
Washers
Front Bracket
Wheel Lock Bracket
Washers
145
Mounting
Screws
Solara®3G/Spree 3G