11. Secure the front of the seat pan to the front crossbrace with the two 1
(FIGURE 8.19). Tighten securely.
Crossbrace Tube
NOTE: Seat pan, seat frame and base frame are shown for reference only. 15 ‐ 19 inch deep seat frame is
shown. For 12 ‐ 16 inch deep seat frame illustration, see detail "A" in FIGURE 8.16.
Converting from Flush Mount to Drop Down (18 - 22 Inch Deep Seat Frames)
Remove Seat Pan
NOTE: For this procedure, refer to FIGURE 8.20 on page 76.
1.
Remove the seat cushion from the seat pan.
3
2.
Remove the 1
/
inch mounting screw (Black) and locknut that secures the rear (center) of the seat pan to the crossbrace
4
tube.
Part No 1160889
3
1
/
Inch Mounting
4
Screw (Black)
5
/
Inch Mounting
8
Screw
Thin Locknuts
FIGURE 8.19 Installing the Seat Pan
SECTION 8—SEAT (WHEELCHAIRS BUILT BEFORE 4/5/2010)
1
/
4
5
Locknut
75
inch mounting screws and
/
Inch Mounting Screw
8
Seat Pan
Thin Locknut
Front Crossbrace
1
- 28 Locknuts
/
4
1
/
‐ 28 locknuts
4
1
1
/
Inch Mounting
4
Screws
Solara®3G/Spree 3G