Troubleshooting - Mechanical - Invacare Solara 3G Service Manual

SECTION 2—SAFETY INSPECTION/TROUBLESHOOTING
❑ Ensure that casters are free of debris.
❑ Check pneumatic tires for proper inflation.
Inspect/Adjust Monthly
❑ Ensure sealed bearings and axle nut tension are correct..
❑ Ensure there is no excessive side movement or binding when drive wheels are lifted and spun.
❑ Adjust bearing system if wheel wobbles noticeably or binds to a stop.
❑ Inspect tires for flat spots and wear.
❑ Ensure wheel locks do not interfere with tires when rolling.
❑ Ensure wheel lock pivot points are free of wear and looseness.
❑ Ensure wheel locks are easy to engage.
❑ Inspect axles to ensure they are free from dirt, lint, etc.
❑ Inspect tilt slides and roller bearings to ensure they are free from dirt, lint, etc.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame
is secure and undamaged. Replace if necessary.
Inspect/Adjust Periodically
❑ Inspect clothing guards for bent or protruding metal.
❑ Ensure that all fasteners on clothing guards are secure.
❑ Ensure arms are secure but easy to release and adjustment levers engage properly.
❑ Ensure that casters are free of debris.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure armrest upholstery has no rips.
❑ Ensure armrest pad sits flush against arm tube.
❑ Ensure trigger release lever cables and handles return when released.
❑ Ensure sealed bearings and axle nut tension are correct.
❑ Inspect handrims for signs of rough edges or peeling finish.
❑ Ensure seat, back and/or arm upholstery have no rips.
❑ Clean upholstery and armrests.
❑ Clean and wax all parts.
❑ Check that all labels are present and legible. Replace if necessary.

Troubleshooting - Mechanical

X X
X X
X X
Solara®3G/Spree 3G
If pneumatic tires, check for correct and equal pressure.
X X Check for loose stem nuts/bolts.
Check that casters contact ground at the same time.
SOLUTIONS
18
Part No 1160889