SECTION 11—VENT TRAY
4.
Secure the vent foot tilt connecting link to the foot tilt release pedal with 1 inch mounting screw, two nylon washers,
nylon spacer and locknut. Tighten securely (FIGURE 11.11).
Install Foot Tilt Lock Out
NOTE: For this procedure, refer to FIGURE 11.12 on page 104.
1.
Secure the new foot tilt lockout release pedal to the wheelchair frame with the 2 inch mounting screw,
11
coved spacer,
/
washer and locknut that.
16
NOTE: Vent tray and attaching
brackets not shown for clarity.
Solara®3G/Spree 3G
Vent Foot Tilt
Connecting Link
1 Inch Mounting
Screw
FIGURE 11.11 Installing the New Longer Connecting Link
2 Inch Mounting Screw
FIGURE 11.12 Remove Foot Tilt Lock Out
Nylon Washer
Nylon Spacer
Nylon Washer
Coved Spacer
Vent Tray Support Tube
11
/
Washer
16
104
1
/
- 28
4
Locknut
Foot Tilt Release
Pedal
NOTE: Vent tray and attaching
brackets not shown for clarity.
7
/
nylon washer,
8
Locknut
11
/
Washer
16
Foot Tilt Lock Out
Release Pedal
7
/
Nylon Washer
8
Part No 1160889