Adjusting The Height Of The Calf Pad; Adjusting The Width Of The Legrests Fixed To The Side (Standard / Flex 2 Seat / Modulite Seat); Legrests For The Firm Seat; Modifying The Front Seat Depth By Adjusting The Legrest Support Brackets - Invacare Spectra XTR User Manual

5.17.5 Adjusting the height of the calf pad

1. Loosen the hand screw (1).
2. Adjust to required position.
3. Retighten the wing nuts.
5.18 Adjusting the width of the legrests fixed to
the side (Standard / Flex 2 seat / Modulite seat)
Requirements:
•
Jaw spanner 13 mm (standard seat and Modulite seat)
•
Jaw spanner 10 mm (Flex 2 seat)
1528224-Q
Adjusting the mobility device to the user's seating posture
The screws that allow width adjustment of side-mounted legrests
are located under the seat (1).
1. Loosen the screws using the open-end spanner.
2. Adjust the legrest to the desired position.
3. Re-tighten the screws.

5.19 Legrests for the firm seat

5.19.1 Modifying the front seat depth by adjusting
the legrest support brackets
The seat depth in the front can be modified by adjusting the position
of the legrest support brackets. Adjusting the position of the legrest
support brackets is the same for all types of legrests.
Requirements:
•
1 x Allen key 4 mm
63