Kyocera TASKalfa 7002i Service Manual page 1592

9-4 Chart of image adjustment procedures
Adjusting
Item
order
Adjusting the center line of the MP
tray
(Adjustment of writing)
1
Changes the LSU writing start tim-
ing.
Adjusting the center line of the
cassettes
(Adjustment of writing)
Changes the LSU writing start tim-
2
ing.
Adjusting the leading edge regis-
tration of the MP tray
(Adjustment of writing)
3
Changes the secondary paper
feed timing.
Adjusting the leading edge regis-
tration of the cassette
(Adjustment of writing)
4
Changes the secondary paper
feed timing.
Adjusting the leading edge margin
(Adjustment of writing)
Changes the LSU illumination start
5
timing.
Maintenance mode
Image Page
Item No. Mode
U034 LSU Out Left P.6-38
U034 LSU Out Left P.6-38
U034 LSU Out Top P.6-38
U034 LSU Out Top P.6-38
U402 Lead P.6-165
Setting procedure
Method
1. Press the Start key. 1. By using the [Left/Right],[+/-]
2. Select the adjustment content. cursor or the numeric keys,
[LSU Out Left] -[MPT] change the setting value.
3. Press the System Menu key. 2. Press the Start key to set the
4. Press the Start key. setting value.
(Pattern output)
Press the [Stop] key.
5. Press the System Menu key.
6. Execute the adjustment.
1. Press the Start key. 1. By using the [Left/Right],[+/-]
2. Select the adjustment content. cursor or the numeric keys,
LSU Out Left - change the setting value.
[Cassette1] to[Cassette7] 2. Press the Start key to set the
3. Press the System Menu key. setting value.
4. Press the Start key.
Press the [Stop] key.
(Pattern output)
5. Press the System Menu key.
6. Execute the adjustment.
1. Press the Start key. 1. By using the [Left/Right],[+/-]
2. Select the adjustment content. cursor or the numeric keys,
[Lsu Out Top] -[MPT(L)] change the setting value.
3. Press the System Menu key. 2. Press the Start key to set the
4. Press the Start key. setting value.
(Pattern output)
5. Press the System Menu key. Press the [Stop] key.
6. Execute the adjustment.
1. Press the Start key. 1. By using the [Left/Right],[+/-]
2. Select the adjustment content. cursor or the numeric keys,
[Lsu Out Top] - [Cassette(L)] change the setting value.
3. Press the System Menu key. 2. Press the Start key to set the
4. Press the Start key. setting value.
(Pattern output)
Press the [Stop] key.
5. Press the System Menu key.
6. Execute the adjustment.
1. Press the Start key. 1. By using the [Left/Right],[+/-]
2. Select the adjustment content. cursor or the numeric keys,
[Lead] change the setting value.
3. Press the System Menu key. 2. Press the Start key to set the
4. Press the Start key. setting value.
(Pattern output)
Press the [Stop] key.
5. Press the System Menu key.
6. Execute the adjustment.
9-12
Remarks
Setting
*When the setting value is increased, the image
moves rightward.
*When adjusting for the duplex copy, select
[Duplex].
*When the setting value is increased, the image
moves rightward.
*When adjusting for the duplex copy, select
[Duplex].
*When the setting value is increased, the image
moves downward.
*When adjusting for the duplex copy, select
[Duplex].
*When the setting value is increased, the image
moves downward.
*When adjusting for the duplex copy, select
[Duplex].
*When the setting value is increased, the image
get longer.
2WA/2NJ/2RK-1