Table of Contents
Advertisement
Figure 103. Removing the M.2 BOSS card from the M.2 BOSS riser
Next steps
If applicable,
install an card into the M.2 BOSS
Installing the M2 BOSS card into the M.2 BOSS riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Removing the M.2 BOSS
Steps
1. Align and insert the M.2 BOSS card connector with the connectors on the M.2 BOSS riser.
2. Press the blue touch point on the M.2 BOSS card until it is firmly seated.
Figure 104. Installing the M2 BOSS card into the M.2 BOSS riser
102
Installing and removing system components
riser.
Safety
instructions.
Before working inside your
riser.
system.
Advertisement
Table of Contents
