Monitor Optical Power - Fluke Versiv Series User Manual

Find Quality Products Online at:
Power at the
end of a link
Figure 122. Connections to Monitor Power and Loss
To monitor loss
On the POWER METER / LIGHT SOURCE screen, tap REF to use the
present power level as a reference. The meters show the difference
between the reference power levels and the measured power levels.
To save the power and loss measurements
On the POWER METER / LIGHT SOURCE screen, tap SAVE.
1
On the SAVE RESULT screen, select End 1 or End 2, make sure
2
the Cable ID and End name are correct, then tap SAVE. Saved
power meter results show these icons for End 1 and
End 2:
The tester saves the present, minimum, maximum, and reference
power and loss measurements for both wavelengths in one record.
GlobalTestSupply
www.

Monitor Optical Power

Optical network
interface card or
optical power source
Power from an
optical source
GPU138.EPS
.com
sales@GlobalTestSupply.com
317