Fluke Versiv Series User Manual page 37

Versiv Series Cabling Certification Product Family
Users Manual
24
Find Quality Products Online at:
 SAVE (yellow),  TEST (gray): These buttons show if the test
passed and Auto Save is off. When you tap SAVE, you can save
the results with an ID that you make or select. When you tap
TEST, you can select to save the results or do the test again and
not save the results.
 UNSAVED RESULT: This button shows if Auto Save is off and
you go to the home screen when a test is completed. Tap this
button to see the result.
 FIX LATER: This button shows if the test failed or had a PASS*
result and the result has not been saved.
 TEST AGAIN: This button shows if the test failed or had a
PASS* result. Tap this button to do the test again. If Auto Save
is on, the tester saves subsequent results with the same ID. If
the test fails again, you can tap FIX LATER to save the result if
necessary.
When you look at a saved result that failed, tap TEST AGAIN to
do the test again for the same ID and with the same test settings
as the saved result.
 TEST (yellow): This button shows if the test passed and Auto
Save is on. When Auto Save is on, the tester saves results with
the next available ID when the test is completed. When you
tap TEST, the tester does a test for the next available ID.
 : The  key does the same function as the TEST
button. When TEST AGAIN shows, you can press  to do a
test on the next ID.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com