Table of Contents
Advertisement
Find Quality Products Online at:
The overall result for the Autotest.
The loss and length measurements for the fiber:
The result exceeds the limit.
The result is within the limit.
The selected test limit does not have a limit for the test.
To see the results, limits, and margins for the fiber, tap the
window.
The settings the tester used for the test.
The dashed lines are around the connectors and fiber that are
included in the loss and length results. Gray connectors and
fibers are not included because you used them to set the
reference.
Connector icons show the number you entered for the TOTAL
CONNECTIONS setting on the No. of Connectors/Splices
screen (Figure 58 on page 154). For Figure 65, the TOTAL
CONNECTIONS setting is 3.
The round icon shows the number of splices entered for the
SPLICES setting on the No. of Connectors/Splices screen.
To see help for the screen, tap
When more than one button shows at the bottom of the
screen, the tester highlights one in yellow to recommend
which one to tap. See "Buttons to Do Tests and Save Results"
on page 22.
GlobalTestSupply
www.
Certify Fiber Cabling
Autotest in Loopback Mode
.
173
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
