Fluke Versiv Series User Manual page 257

Versiv Series Cabling Certification Product Family
Users Manual
248
Find Quality Products Online at:
 LCD display with touchscreen.
single-mode OTDR port with an APC (angled physical contact)

endface, interchangeable SC adapter and protective cap. The
LED in front of the port turns on when the port emits an optical
signal.
W
Do not connect PC or UPC connectors to the HDR
OTDR port. Doing so can damage the port's APC
endface, and the large reflection at the OTDR port
can cause unreliable test results.
 Visual fault locator port and protective cap. The LED in front of
the port turns on when the port emits an optical signal.
Button that controls the VFL.

W
Do not look directly into optical connectors. Some
sources emit invisible radiation that can cause
permanent damage your eyes.
Micro USB port: This USB port lets you connect the tester to a PC

so you can upload test results to the PC and install software
updates in the tester.
Type A USB port: This USB host port lets you save test results on a

USB flash drive and connect the FiberInspector Pro video probe
to the tester. On a Versiv main tester, this port lets you or connect
a Wi-Fi adapter for access to the Fluke Networks cloud service
LinkWare Live. (Versiv 2 testers have an internal Wi-Fi radio.)
Headset jack.

 : Starts a test. To start a test, you can also tap TEST on the
display.
GlobalTestSupply
www.
Caution
*
Warning
.com
sales@GlobalTestSupply.com