Table of Contents
Advertisement
Find Quality Products Online at:
TOOLS: The TOOLS menu lets you set the reference, see the
status of the tester, and set user preferences such as the
language and the display brightness.
RESULTS: Tap RESULTS to see and manage the results that are
saved in the tester.
SYNC: Tap SYNC to sync projects with LinkWare Live.
TEST: Tap TEST to do the test shown in the test setup panel.
% Tested: The percentage of the project that is completed.
The percentage is the number of IDs used for saved results
divided by the total number of used and available IDs in the
project. The number of IDs includes IDs for copper and fiber
cable. Figure 128 on page 341.
% Tested does not show if your project contains only a Next ID
list. See "About Next ID Sets" on page 340 for more information
about the Next ID list.
The type of module attached to the main tester.
This icon shows when the tester's link interface adapter
is connected to the adapter on a remote tester and the
remote is turned on.
DSX-5000 only: The arrows on the remote connection
icon are orange when the main and remote use long-range
communication mode. See "Long-Range Communication Mode
(DSX-5000)" on page 72.
The asset management icon shows when the owner of a
LinkWare Live account has enabled the asset management
service on the tester. "About the Asset Management Service" on
page 352.
GlobalTestSupply
www.
Certify Twisted Pair Cabling
The DSX CableAnalyzer Home Screen
.com
sales@GlobalTestSupply.com
41
Advertisement
Table of Contents
