Table of Contents
Advertisement
Find Quality Products Online at:
Connector for a link interface adapter
DSX-8000 modules have a recess for the tabs on Cat 8/Class I/II
adapters. You cannot attach Cat 8/Class I/II adapters to
DSX-5000 modules.
RJ45 jack for communications between the main and remote
testers when you do alien crosstalk measurements. See
"About the AxTalk Analyzer Kit" on page 73.
LCD display with touchscreen
: Starts a test. Turns on the tone generator if a remote
tester is not connected to the main tester. To start a test, you
can also tap TEST on the display.
: Power button. Versiv 2: The LED in the button shows the
status of the battery charging process. See Table 2 on
page 15.
: Press to go to the home screen.
Connector for the AC adapter. Versiv: The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See "Charge
the Battery" on page 14.
RJ45 connector: Lets you connect to a network for access to
Fluke Networks cloud services.
Micro USB port: This USB port lets you connect the tester to a
PC so you can upload test results to the PC and install
software updates in the tester.
Type A USB port: This USB host port lets you save test results
on a USB flash drive and connect the FiberInspector Pro video
probe to the tester. On a Versiv main tester, this port lets you
or connect a Wi-Fi adapter for access to the Fluke Networks
cloud service LinkWare Live. (Versiv 2 testers have an internal
Wi-Fi radio.)
Headset jack
GlobalTestSupply
www.
Certify Twisted Pair Cabling
Connectors, Keys, and LEDs
31
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
