Table of Contents
Advertisement
Find Quality Products Online at:
Tap TEST on the tester to view a live image of the endface on
8
the display.
For FI-1000 tests:
9
To adjust the focus, turn the dial on the probe clockwise or
counterclockwise.
To adjust the brightness or contrast of the image, tap
move the bars on the controls. To hide the controls, tap
again.
To put the screen in still mode and turn off the probe, press the
button on the probe or tap
press the button on the probe or tap
To zoom in and out, tap
use the pinch, reverse-pinch, and double-tap gestures on the
touchscreen. See Figure 3 on page 21.
10 Tap ANALYZE to do an endface analysis.
An image of the connector with the test results shows on the
display for you to view.
With Test Limit set to test to a standard and the results show
PASS or with Test Limit set to Document Only, you can save the
results.
With Test Limit set to test to a standard and the results show
FAIL, you can schedule to fix the connection later or to test
again.
GlobalTestSupply
www.
Chapter 5: FiberInspector™ Pro Tests
Do a FiberInspector Test
. To turn the probe on again,
.
to put the screen in still mode, then
.com
, then
121
sales@GlobalTestSupply.com
Advertisement
Table of Contents
