Fluke Versiv Series User Manual page 60

Find Quality Products Online at:
Table 3. Settings for Twisted Pair Tests(cont.)
Test Limit
Select the correct test limit for the job. To see a different
group of limits, tap MORE, then tap the name of a
group.
Store Plot Data
: The tester does not save plot data for frequency-
Off
domain tests or for the HDTDR/HDTDX analyzers. You
can see the plots before you save the test and exit the
results screen. The saved results show frequency-domain
measurements in a table and do not include the HDTDR/
HDTDX plots.
: The tester saves plot data for all frequency-
On
domain tests required by the selected test limit and for
the HDTDR/HDTDX analyzers.
HDTDR/HDTDX
Fail/Pass* only:
analyzer results only for Autotests with
FAIL
results.
All Autotests:
analyzer results for all Autotests.
Never:
The tester never shows HDTDR or HDTDX
analyzer results. This setting also disables the automatic
diagnostics, so the FAULT INFO screens never show.
To get HDTDR/HDTDX analyzer results you can also tap
TOOLS > Diagnostics.
For more information about the HDTDR and HDTDX
analyzers, see the Technical Reference Handbook.
Bi-directional
This setting shows only when you select a patch cord test
limit. It is used mainly by patch cord manufacturers to
make the Autotest time shorter.
On: The tester does tests in both directions.
Off: The tester does tests in only one direction, which
decreases the Autotest time.
GlobalTestSupply
www.
Certify Twisted Pair Cabling
Settings for Twisted Pair Tests
The tester shows HDTDR and HDTDX
PASS*
The tester shows HDTDR and HDTDX
.com
FAIL*
, , or
47
sales@GlobalTestSupply.com