Set Up A Project; The Project Screen - Fluke Versiv Series User Manual

Versiv Series Cabling Certification Product Family
Users Manual

Set Up a Project

The PROJECT Screen

336
Find Quality Products Online at:
Refer to the PROJECT screen in Figure 127 on page 337.
On the home screen, tap the PROJECT panel, tap CHANGE
1
PROJECT, then tap NEW PROJECT.
On the NEW PROJECT screen, enter a name for the project,
2
then tap DONE.
On the PROJECT screen, tap the Operator panel to enter an
3
operator name for the project.
On the PROJECT screen, tap the NEW TEST button to enter
4
the tests and test settings necessary for the project.
On the PROJECT screen, tap the NEW ID SET button to make
5
one or more sets of cable IDs for the project. See the CABLE ID
SETUP screen in Figure 128 on page 341.
On the PROJECT screen, tap DONE.
6
To start a new project, tap the PROJECT panel on the screen.
Figure 127 shows the PROJECT screen and describes the items you
enter to make a project.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com