Set Up A Fiberinspector Test - Fluke Versiv Series User Manual

Find Quality Products Online at:

Set up a FiberInspector Test

To set up a FiberInspector test on the tester:
On the home screen, tap the test setup panel.
1
The CHANGE TEST screen shows on the display.
To set up a new FiberInspector test, tap NEW TEST.
2
Or
Select a FiberInspector test, then tap EDIT.
The TEST SETUP screen shows.
If necessary, tap Module.
3
Tap FiberInspector Pro.
4
Tap the panels to change settings for the test. See Table 6.
5
To set up a project, which includes test settings,
cable IDs, and an operator name, see Chapter 13.
Tap SAVE.
6
On the CHANGE TEST screen, if necessary, select the radio
7
button next to the test and tap USE SELECTED.
GlobalTestSupply
www.
Chapter 5: FiberInspector™ Pro Tests
Set up a FiberInspector Test
Note
.com
117
sales@GlobalTestSupply.com