Make Sure Your Tester Is Ready To Certify Cabling - Fluke Versiv Series User Manual

Versiv Series Cabling Certification Product Family
Users Manual
Make Sure Your Tester is Ready to Certify
Cabling
42
Find Quality Products Online at:
This icon shows when the talk function is on. To use the

talk function:
Connect the main and remote testers together through a
1
link that has one or more good wire pairs.
Connect headsets to the headset jacks on the testers.
2
Press the button on one of the headset microphones or
3
press  on the remote, then speak into the
microphone.
To make sure your tester meets its accuracy specifications, follow
these guidelines:
Keep the tester's software current. The latest software is
•
available on the website. See "Update the Software" on
page 359.
Set the reference for the twisted pair adapters every 30 days.
•
See
Set the Reference
Make sure that you select the correct cable type for the job, and
•
that the NVP for the cable is correct. See Table 3 on page 46.
Make sure you select the correct test limit for the job. See
•
Table 3 on page 46.
Make sure the cords and connectors for all test equipment
•
and patch cords are in good condition.
Make sure the battery is fully charged.
•
Send the modules to a service center every 12 months for
•
factory calibration.
GlobalTestSupply
www.
below.
.com
sales@GlobalTestSupply.com