Table of Contents
Advertisement
Maintenance and service
9.4 Spare parts
9.3.2
Replacing an air filter
The air filters of the dispenser remove dust from the outside air that is drawn in to cool the
interior. With increasing operating time, the filtered dust particles reduce the air flow through
the filters. The reduced air flow results in less cooling of the interior of the dispenser. The
temperature inside the dispenser then rises.
Regularly replace the fabric filters of the enclosure fans to ensure that the air conditioning of
the charging station is within the permissible temperature range.
Only replace the filter mats when the device is de-energized.
9.3.3
Charging cable gland
The proper attachment of the charging cables to the charging station can change due to
temperature fluctuations and impermissible tensile loads. Therefore, check the cable glands
for tightness with a maximum tightening torque of 30 Nm. Refer to the following table for
the wrench sizes for the cable glands of your charging station:
Table 9-1 Required tools
Charging cable
400 A (boost mode) CCS
9.4
Spare parts
The order number of the spare part list is: 8EM5907-0AA00-2AA6. You can download the
spare part list here (https://support.industry.siemens.com/cs/ww/en/view/109814736).
76
Width across flats
SW45
Operating Instructions, 10/2023, A5E52758387-AB
Dispenser
Advertisement
Table of Contents
