Table of Contents
Advertisement
4.2
Scope of delivery
The dispenser is supplied with an accessories kit box. The following is included in the
accessories kit box:
• 4 units crane lugs for mounting the dispenser
• 4 units skirting
• 2 units M6 hexagon screws (10 mm width across flats)
• 1 unit roof
• 2 units M6 combination screws (TX 30) to fasten the roof
4.3
Road transport
Description of packaging
If the dispenser is transported by road, the dispenser is placed on a reinforced and insulated
wood pallet. Film protects the dispenser against dirt particles and moisture.
The packaging consists of the following elements:
• Export packaging in accordance with IPPC standard (ISPM15)
• Reusable carton with bayonet closure
• Base plate
• Pallet base
• PE cover
• Strapping for securing load
• Box of accessories attached to the side of the packaged charging station
NOTE
Packaging for road transport cannot be stacked.
Dispenser
Operating Instructions, 10/2023, A5E52758387-AB
Transport and storage
4.3 Road transport
31
Advertisement
Table of Contents
