Goods Acceptance; Checking The Delivery For Completeness And Correctness; Checking The Transport Packaging; Report Missing Delivery Components Or Transport Damage - Siemens SICHARGE D Dispenser Operating Instructions Manual

Table of Contents

Installation and mounting

5.4

Goods acceptance

5.4.1

Perform an incoming goods inspection as soon as the goods are delivered. Check the goods

for completeness and correctness based on the delivery documents.

5.4.2

Start the inspection of the transport packaging with the visual inspection. Any damage must

be reported to and acknowledged by the carrier.

After the visual inspection, start by unpacking the dispenser.

5.4.3

If you discover that the delivery is incomplete or that there is transport damage, document

the damage first. Then submit a damage report.

Documenting damage

Take immediate action to determine the exact extent, cause and origin of the damage. Take

immediate and appropriate measures to limit the damage.

In particular, document the damage as follows:

• Photograph the damage.

• Record all known information on the damaging event, e.g. location, time and date.

Report incomplete delivery or damaged delivery items

If the delivery is incomplete or damaged, inform the following persons immediately:

• Contact of the supplier (see delivery note)

• Contact of the purchaser (see delivery note)

• Person responsible for the transport company

5.5

Installing the dispenser

NOTE

Reliable and clear communication between the crane or forklift driver and the installer must

be ensured at all times during positioning and installation of the dispenser.

Operating Instructions, 10/2023, A5E52758387-AB

Dispenser

Table of Contents