Maintenance and service
11.3 Servicing the charging station
11.3.3
Replacing an air filter
The air filters of the charging station remove the dust from the outside air pulled in for
cooling the interior. With increasing operating time, the filtered dust particles reduce the air
flow through the filters. The interior of the charging station is less cooled due to the reduced
air flow. This causes the temperature inside the charging station to rise.
To keep the air inside the charging station within the permitted temperature range, regularly
replace the fabric filters of the cabinet fans.
Required tools and spare parts
You will need the following tools to replace an air filter:
• Screwdriver
• Bit:
– Socket, width across flats 10
– Torx, TX30
• Stepladder
You will also need the following air filters:
Fabric filter of filter class G3 according to standard EN 779 with the following dimensions:
• Pack of 4: 223 x 223 mm
• Pack of 1 86 x 255 mm
• Pack of 1 171 x 717 mm
138
Operating Instructions, 02/2023, A5E50068475-AB
SICHARGE UC 150