Table of Contents
Advertisement
Safety instructions
2.1 General
The dispenser must be set up in accordance with the information in these operating
instructions. Transport, installation, maintenance, cleaning, and normal operation must
follow the instructions or procedures specified in these operating instructions.
Danger due to missing or unrecognizable safety signs and warnings
Missing or unrecognizable safety signs or warnings do not indicate that danger is not no
longer present. Undetected dangers can result in accidents with serious physical injury or
death.
• Check the presence of all safety signs and warnings using the operating instructions
• Replace missing safety signs and warnings
• Do not remove safety signs and warnings
• Replace unrecognizable safety signs and warnings
2.1.2
Qualified personnel
Qualified personnel
All work on the dispenser may only be performed after receiving instruction. Non-electrical
work, e.g. transport and assembly, may only be performed by qualified personnel. Qualified
personnel are qualified by training and experience to recognize risks arising during the
respective work and to avoid possible hazards.
Electrical engineering work may only be performed by qualified electricians themselves or
under their direction and supervision. A qualified electrician is someone who is able to assess
the work assigned to them and recognize potential dangers due to their professional training,
knowledge and experience as well as knowledge of the relevant standards.
2.1.3
Protection against unauthorized opening
Protection against unauthorized opening
A lock system protects the dispenser from unauthorized opening of the device door.
• Keep the key for the door locks safe against access by unauthorized persons.
• Only make the key available to authorized persons for performing work performed inside
the dispenser.
• Do not leave the dispenser unattended when the device door is open
NOTE
The dispenser is supplied with a replaceable locking cylinder and matching keys. These
standard keys are located on the inside of the front door.
The operator must replace the locking cylinder as protection against unauthorized opening.
The operator must also keep the associated keys safely. The operator must allow service
personnel access to the dispenser for maintenance work.
Use different locking cylinders for each individual dispenser. This ensures that a key can only
be used to open one dispenser.
10
WARNING
Operating Instructions, 10/2023, A5E52758387-AB
Dispenser
Advertisement
Table of Contents
