Installing Baseboards - Siemens SICHARGE D Dispenser Operating Instructions Manual

Installation and mounting
5.5 Installing the dispenser
Figure 5-10 Cable gland plate
5.5.7

Installing baseboards

Mount the baseboards as follows:
1. Insert the two side baseboards into the spring nipples on the rear baseboard to form a U
shape.
Slide this U shape into position below the dispenser.
2. Insert the spring nipples of the front baseboard into the openings on the side baseboards.
3. Screw the front baseboard to the dispenser from the inside with the two M6 hexagon
bolts (10 mm width across flats).
Disassembly is only possible in reverse order.
Figure 5-11 Baseboard assembly
50
Operating Instructions, 10/2023, A5E52758387-AB
Dispenser