Table of Contents
Advertisement
Locking system & replacing the lock cylinders
The door locks and the door opener secure access to the inside of the dispenser. The locking
cylinder is located on the left side next to the door. Deflect the locking cylinder and rotate the
lever to the left to open the door.
The locking cylinder can be removed by loosening the fixing screw. Replace the supplied
locking cylinders with your own standard half cylinders (10/30) according to DIN 18252 to
maintain the Industrial Security concept. Observe the maximum torque of 2.5 Nm.
Figure 3-2 Locking cylinder on the side
A position switch detects whether the door is closed. If, despite the locking system, the door
is opened during operation without authorization, the Emergency Stop is triggered. The
circuit breaker opens automatically and interrupts the power supply to the power branches.
Power supply to the controller is maintained.
If the door is to be opened, the entire charging station must first be shut down (see section
6.3 "Switching off the charging station" (Page 58)).
To open the door, rotate the deflected swivel lever to the left.
Dispenser
Operating Instructions, 10/2023, A5E52758387-AB
3.4 Display elements and operator controls
Description
25
Advertisement
Table of Contents
