Software; Abbreviations - Banner SCR P Series Instruction Manual

8 Software

The BERNSTEIN Safety Controller Software is an application with real-time display and diagnostic tools that are used to:
•
Design and edit configurations
•
Test a configuration in Simulation Mode
•
Write a configuration to the Safety Controller
•
Read the current configuration from the Safety Controller
•
Display the real-time information, such as device statuses
•
Display the fault information
The Software uses icons and circuit symbols to assist in making appropriate input device and property selections. As the
various device properties and I/O control relationships are established on the Functional View tab, the program
automatically builds the corresponding wiring and ladder logic diagrams.
See Creating a Configuration
configuration design process.
See Wiring Diagram Tab on p. 87 to connect the devices, and
the configuration.
See Live Mode on p. 101 for the Safety Controller Run-time information.

8.1 Abbreviations

Abbreviation 9
Description
AVM Adjustable Valve Monitoring input node of the Safety Outputs
AVMx Adjustable Valve Monitoring input
BP Bypass input node of the Bypass Blocks and Muting Blocks
BPx Bypass Switch input
CD Cancel Delay input node of the Safety Outputs
CDx Cancel Delay input
DCD In-Series Diagnostic
ED Enabling Device input node of the Enabling Device Blocks
EDx Enabling Device input
EDM External Device Monitoring input node of the Safety Outputs
EDMx External Device Monitoring input
ES Emergency Stop input node of the Enabling Device Blocks
ESx Emergency Stop input
ETB External Terminal Block (SCR P-2 only)
FID Feature identification
FR Fault Reset input node of the Safety Outputs
GSx Gate Switch input
JOG Jog Input node of the Enabling Device Blocks
IN Normal Input node of function blocks and Safety Output blocks
LR Latch Reset input node of the Latch Reset Block and the Safety Outputs
ME Mute Enable input node of the Muting Blocks and Two-Hand Control Blocks
MEx Mute Enable input
MP1 First Muting Sensor Pair input node in Muting Blocks and Two-Hand Control Blocks
MP2 Second Muting Sensor Pair input node (Muting Blocks only)
Mx Base Controller and Expansion modules (in the order displayed on the Equipment tab)
9 The "x" suffix denotes the automatically assigned number.
on p. 52 for the configuration design process. See
www.bernstein.eu
Programmable Safety Controller SCR P
Sample Configuration
Ladder Logic Tab on p. 88 for the ladder logic rendering of
- Tel: + 49 571 793 0
on p. 58 for a sample
59