Banner SCR P Series Instruction Manual page 159

The Online & diagnostics window displays.
13. Select Assign IP address under Functions.
14. Click Accessible devices.
The Select device window searches the network for available devices.
15. Determine the device to be adjusted via the MAC address and select it.
16. Click Apply.
The IP address for the device is updated.
17. Click Assign IP address to complete the
step. This step is completed for every device.
Figure 113: TIA - Online & Diagnostics
Figure 114: TIA - Assign IP Address—Accessible Devices
Figure 115: TIA - Select the Device and Apply Changes
www.bernstein.eu - Tel: + 49 571 793 0
Programmable Safety Controller SCR P
159