Banner SCR P Series Instruction Manual page 112

Programmable Safety Controller SCR P
WORD # WORD NAME
0 Virtual Input On/Off (1–16)
1 Virtual Input On/Off (17–32)
2 Virtual Input On/Off (33–48)
3 Virtual Input On/Off (49–64)
reserved
4
5 reserved
reserved
6
7 reserved
8 Virtual Reset/Cancel Delay (1–16) [RCD Register Bits] (see
Virtual Manual Reset and Cancel Delay (RCD) Sequence
p. 38)
9 reserved
10 RCD Actuation Code [RCD Enable Register] (see
Reset and Cancel Delay (RCD) Sequence
Safety Controller Inputs (Outputs from the PLC) O > T
The Safety Controller uses Instance 114 (0×72) with a size of fourteen registers (16-bit) as its Input Assembly (PLC Output)
when sending virtual inputs, resets, and cancel delays to the safety controller and for obtaining performance and status
information about DCD devices.
Table 5: PLC Output Assembly Instance 114 (0×72)—Safety Controller Inputs O > T
WORD # WORD NAME
0 Virtual Input On/Off (1–16)
1 Virtual Input On/Off (17–32)
2 Virtual Input On/Off (33–48)
3 Virtual Input On/Off (49–64)
reserved
4
reserved
5
19
This eleven word assembly is called 112 (0x70) for FID 2 Safety Controllers with date codes before and including "1716". See
XS/SC26-2 EDS file and documentation should you use?
112
Virtual Manual
on p. 38)
on p. 130 for more information.
www.bernstein.eu - Tel: + 49 571 793 0
DATA TYPE
16-bit integer
16-bit integer
16-bit integer
16-bit integer
16-bit integer
16-bit integer
16-bit integer
16-bit integer
16-bit integer
on
16-bit integer
16-bit integer
DATA TYPE
16-bit integer
16-bit integer
16-bit integer
16-bit integer
16-bit integer
16-bit integer
Which