Wiring Diagram Tab - Banner SCR P Series Instruction Manual

Programmable Safety Controller SCR P

8.8 Wiring Diagram Tab

Figure 71: Wiring Diagram Tab—SCR P with External Terminal Blocks
The Wiring Diagram tab shows the terminal assignments and the electrical circuits for the safety and non-safety inputs,
Safety Outputs, and status outputs, and any terminals that are still available for the selected module. Use the wiring
diagram as a guide to physically connect the devices. Navigate between modules using the Page Navigation toolbar at the
top right corner of the Software.
www.bernstein.eu - Tel: + 49 571 793 0 87