Equipment Tab - Banner SCR P Series Instruction Manual

Programmable Safety Controller SCR P

8.4 Equipment Tab

SCR P: The Equipment tab is used to add input devices and status outputs.
Customize the Base Controller module or SCR P by either double-clicking the module or selecting it and clicking Edit
under the Properties table on the left and selecting the appropriate Safety Controller features (display, Ethernet,
expandability, Automatic Terminal Optimization). The properties of Safety and Non-Safety inputs, Status Outputs, Logic
Blocks, and Function Blocks are also configured by either double-clicking the block or selecting it and clicking Edit under
the Properties table. Clicking the block the second time de-selects it.
64
Figure 41: Example Equipment Tab
Figure 42: SCR P Module Properties
www.bernstein.eu - Tel: + 49 571 793 0